
Frameless Glass
Toughened glass panels held by spigots or channels. Clear sight lines to the water from the house and outdoor area.
Pool fencing installation Wagga Wagga families need is not a style decision first. It is a child-safety barrier with set rules for height, gaps, gates and what can be climbed nearby. Get those right and the look follows.
Fencing Wagga Wagga installs frameless and semi-frameless glass, aluminium tubular and steel pool barriers for new pools, renovations and properties preparing for sale or lease.


Toughened glass panels held by spigots or channels. Clear sight lines to the water from the house and outdoor area.

Glass held between slim posts. A lower cost route to a glass look, with a little more visible metal.

Powder-coated vertical bars with top and bottom rails. Practical, durable and the most common choice on family backyards.

Heavier galvanised and powder-coated steel for spas, larger perimeters and sites that need a tougher barrier.
The pool is fenced off on all sides from the house and yard. It gives the clearest separation between living areas and water.
An existing boundary fence can form one or more sides if it meets barrier height and non-climbable requirements on the pool side.
Glass on the side facing the patio or house, with aluminium on the less visible sides to manage cost.
Smaller water bodies still need a compliant barrier. Compact layouts often need a careful gate position so it can swing clear.
Every material can be built to comply. The difference is in looks, cleaning and how it copes with pool chemicals and sun.
| Finish | Characteristics | Typical applications | Considerations |
|---|---|---|---|
| Toughened safety glass | Clear, smooth panels with polished edges. | Views from living and entertaining areas. | Shows water spots and dust, so it needs regular cleaning to stay clear. |
| Stainless or aluminium spigots | Core-drilled or surface-mounted fixings for glass. | Frameless glass on concrete, pavers or decking. | Fixing into decking needs solid framing below, which we check before quoting. |
| Powder-coated aluminium | Light, rust-free bars and rails. | Family pools, side and rear runs. | Chlorine splash and garden tools can wear the coating over time, so rinse the base occasionally. |
| Galvanised steel with powder coat | Heavier gauge and more rigid. | Spas, commercial pools, longer spans. | Cut or drilled steel must be sealed properly or rust can start at the cut. |
These are the points an inspector checks first. We design the layout around them before anything is ordered.
AS 1926.1 sets a minimum effective height of 1200 mm, measured from finished ground on the outside.
Gaps under the barrier and between vertical bars are limited to 100 mm so a small child cannot squeeze through.
Pot plants, retaining walls, barbecues and tree branches must stay out of the climbable zones around the barrier.
Gates must swing away from the pool, self-close and self-latch from any open position.
We measure, note ground levels, nearby climbable objects and where the gate can swing.
We draw the fence line, gate position and material split, and list anything that must be moved.
The quote lists panels, posts or spigots, gate hardware and any coordination with the pool builder.
Posts or spigots are fixed, panels installed and levels checked against finished ground.
Hinges and latches are adjusted so the gate closes and latches from any open position.
We walk the barrier with you and explain what to keep clear. Certification is arranged with council or a private certifier.
Most failed pool inspections come down to the gate. Hardware choice and adjustment matter as much as the panels.
Spring or tension hinges sized for the gate weight, adjusted to close without slamming.
Latches with the release set at the required height so small children cannot reach it.
A gate needs a stiff post. Weak posts flex and stop the gate latching after a few months.
Hinges lose tension over time. We show you how to test the gate so you can catch it early.

A pool builder is finishing the concrete. Spigots need to go in at the right stage so the glass lines up with the coping.

An older aluminium barrier has wide gaps and a tired gate. The owner needs it brought up to standard before listing.

A new deck overlooks the pool. Glass goes on the deck side, aluminium on the boundary sides.
These cards describe the kind of brief we work on. They are not photographed local jobs; the images are stand-ins until project photos are added.
We install pool barriers for homes and facilities in these Wagga Wagga suburbs.
Flood-aware fences, steel posts and post-flood repairs across the river from the CBD.
View detailsPicket fronts, timber boundaries and careful removal of old fences around early-1900s to 1960s homes.
Request a quoteFirst fences for new homes, slat frontages and pool barriers on the northern side.
Request a quoteSecurity perimeters, wide gates and impact repairs for industrial yards on the Sturt Highway.
Request a quotePractical repairs and low-upkeep steel for established homes around Turvey Tops.
Request a quotePrivacy fencing near the house and stock-proof wire where blocks meet farmland.
Request a quotePool barrier upgrades, boundary renewals and front fences along Lake Albert Road.
Request a quoteSteel privacy fencing for side and rear boundaries, set on concreted posts and finished in a colour both neighbours can live with.
View servicePaling, lapped and capped timber fences with post and timber grades chosen for ground contact, termites and summer heat.
View serviceStrainer assemblies, steel posts, ringlock, plain, barbed and electric wire for stock, boundaries and house yards on the city fringe.
View servicePowder-coated horizontal and vertical slat fences, screens and gates with the gap size chosen for privacy, breeze and light.
View serviceLeaning posts, broken palings, dented steel panels, storm and vehicle damage, and gates that no longer latch, fixed without replacing the whole run.
View serviceBoundary, pool, security, rural and slat fencing planned around your block, your neighbours and Wagga Wagga's hot summers and frosty winters.
View serviceChain wire, welded mesh and palisade perimeters with vehicle and pedestrian gates planned around how the site actually runs.
View serviceRemoval of the old fence, disposal and a new fence built on the same day plan, so your yard is open for as short a time as possible.
View serviceCleaning, preparation and stain, oil or paint coatings for timber fences, plus refresh coatings for suitable metal fences.
View servicePool barriers are priced on material, run length, number of gates and how panels fix to the ground. Frameless glass costs the most; aluminium tubular the least.
| Material | Frameless glass, semi-frameless glass, aluminium and steel differ widely in panel cost. |
|---|---|
| Fixing surface | Core drilling into concrete, mounting on decking and setting posts in soil are priced differently. |
| Gates | Each gate needs compliant hinges and a latch, and glass gates need special hardware. |
| Level changes | Steps and slopes need custom panels or careful setting to hold the height. |
| Changes to the yard | Moving a retaining wall or garden bed out of a climbable zone may be extra work. |
We quote after seeing the site, because levels and nearby climbable objects change the design.
Get a pool fencing quoteNo. We design and install barriers to the standard. A certificate of compliance is issued by council or an accredited certifier after inspection, and we can work with them if adjustments are needed.
Yes. In NSW, pools and spas must be registered on the NSW Swimming Pool Register. Owners can do this online.
Often, if it is high enough, has no climbable rails on the outside, and meets non-climbable zone rules. We check it on site.
Aluminium tubular is usually the most economical. Glass costs more but keeps the view open. Many owners mix the two.
Anything a child could climb, such as pot plants, chairs, barbecues and low branches, must stay out of the non-climbable zone.
You generally need a valid certificate of compliance or relevant certificate under the Swimming Pools Act. Getting the barrier inspected early gives time to fix any issues.
Tell us where the pool is, the material you are leaning towards, and whether the pool is new or existing. We will measure, design the barrier around the rules, and send a written quote.
We will tell you plainly if something in the yard must move, if a gate position will not work, or if an existing fence cannot form part of the barrier. Those calls protect children and save a failed inspection.
We will not install a gate that swings towards the water, leave a temporary gap while the pool holds water, or remove a barrier panel for convenience. If the pool is filled before the permanent barrier is ready, talk to your pool builder about temporary fencing.